Click on the image to check the artwork
Item |
No. |
Pressure |
Flow Rate |
Motor Parameter |
|||
Model |
Voltage(V) |
Frequency(Hz) |
Power |
Rotation Speed(R/min) |
|||
B250C |
210000 |
1.0 |
0.25 |
AC380 |
50 |
60 |
1350 |
B500C |
210100 |
0.50 |
60 |
2700 |
|||
B250F |
220000 |
2.0 |
0.25 |
60 |
1350 |
||
B500F |
220100 |
0.50 |
90 |
2700 |
|||
B250H |
240000 |
4.0 |
0.25 |
60 |
1350 |
||
B500H |
240100 |
0.50 |
90 |
2700 |
|||
Oil Gear Pump
Performance and features:
● No oil tank and other accessory parts;
● Equipped with overflow valve to prevent the lubrication pump set from overload;
● Can be installed vertically or horizontally, but the oil height should not exceed the installation surface;
● The suction pipe can be selected according to the actual needs, but the maximum length should not exceed 500mm(the standard is 100mm);
● Viscosity of lubricating oil: 30cst~1500cst;
Usage:
● C - stage pump set without unloading valve, can only be used in the resistance or open lubrication system;
● F, h-class pump set has unloading valve, mainly used in quantitative concentrated thin oil lubrication system.
http://www.sunriseindustry.net/